192.168.1.1 Router Admin Login IP address
IP is the abbreviation for Internet Protocol, which is the concept of assigning an address for each device in a computer network, devices can be computers, printers, etc. and network devices such as wireless transmitters, security devices, etc.
Like computers, network devices may also use IP addresses to access and perform configuration settings and device management. Typically, each wireless device manufacturers will provide an address available to management.
Accordingly, the IP address of 192.168.1.1 is often known as an IP address of the ADSL modem. This is quite a common address that most modem manufacturers are familiar to.
In addition to the default address to access device management, IP address 192.168.1.1 serves as a default gateway to go from the local network to another network. Users can fully manage the network devices as well as installation settings at any time via this address.
192.168.1.1 Default Router Passwords Login
Login IP address 192.168.1.1 is not too difficult and complicated as many people think. Without the assistance of the technicians or someone knowledgeable about network devices, you can still do it by the following simple steps.
First, you need to go to the address of http://192.168.1.1 from any browser such as Chrome, Firefox, IE, etc.
Next, in order to achieve the user interface of the router, type http://192.168.1.1 –t in the console of your browser.
Note: In addition to the above, you absolutely can log in directly to the address management login page of 192.168.1.1 IP modem.
With a conventional modem that has not changed the password, the password is written on the back of the modem, but if there the modem is in position difficult to remove you can observe some common modems here.
Some accounts and password to log in some common modems are presented below:
- TENDA: http://192.168.1.1
- User: root
- Password: root
- Modem TOTOLINK: http://192.168.1.1
- User: admin
- Password: admin
- D-Link: http://192.168.1.1
- User: admin
- Password: admin
- Yes Telecom: http://192.168.1.1
- User: admin
- Password: admin
More Default Router Passwords List:
|Modem Brand||Login IP||Username||Password|
Note: If you still cannot log into the modem using the above accounts and passwords, you must restart the modem by reset button behind the modem.
What can we do by login into IP address 192.168.1.1 and the benefits from the logging into IP address 192.168.1.1
In fact, the login into IP address 192.168.1.1 is exactly how users log into the ADSL modem or router. Logging can not only help users manage their modems better but also help users to rename or manage password. You can even block certain users if desired and perform many other features.
Overall, login into IP address 192.168.1.1 is the way for users to show exclusive right of administration and manage their network devices better.
How to change the username and password from the login of IP address 192.168.1.1?
If you find your username and password by default too boring or you simply want to take ownership over network devices, you can completely change your username and password from the login of IP address 192.168.1.1.
To do this, users need to perform the following tasks:
Step 1: Open a web browser and enter the IP address of the wireless router (default is 192.168.1.1) then click Enter.
Step 2: Enter your username and password, both are an admin in case of default.
Step 3: Select System Tools -> Password upper left to open the configuration page.
Step 4: Enter the old and the new login name, then click Save.
Now that you have completed these steps and change your username admin password. Now, you must remember the new login and password, if you forget, you need to reset the router default configuration.
How to log in to the ADSL modem/router if you have forgotten your username or password?
During the login process into the IP address 192.168.1.1, sometimes because of a certain carelessness reason, you cannot remember your changed username or password leading to failure to log in.
If this happens, do not worry, because you can fully recover even when password and username are lost by doing the following:
Step 1: Turn off the router.
Step 2: Push and hold the reset button on the back panel of the router, then turn the router on (do not take your hands off the reset button on the router during the turning on and hold about 6 ~ 10 seconds after turning on the router).
Step 3: Take your hands off the reset button and wait for the device to reset.
The reset of your device is exactly how you make your network device back to the default manufacturer’s settings, and all of your previous settings will be lost completely.
You also need to note a few points during performing the above:
Make sure the router is powered on before it restarts completely.
The default IP address is 192.168.1.1, and the username and password of the default are an admin.
Surely your computer’s IP address is the same subnet of the device, which means that the IP address of the computer is 192.168.1.x (X in the range of 2 ~ 253) and the subnet mask is 255.255.255.0, the default gateway is 192.168.1.1 and is the IP address of the router.
How to change the IP address 192.168.1.1 to avoid IP address conflicts
The evaluation also is known IP address is similar to addressing the house on every street of this, the matter cannot have the same address on the 2 houses. Likewise, in a network cannot have two computers the same IP address, if the two devices are plugged together IP address to the network will lead to conflict IP address (IP Conflict) and both devices will not work properly.
Just like in one street, two houses cannot have the same number, two computers in the same network cannot have the same IP address if the two devices with the same IP address are plugged into a network, IP address conflict may happen (IP Conflict) and both devices will not work.
To avoid default address conflicts from the manufacturer to the network device, users should change of IP address to avoid the duplication if you use the same network by performing the following steps:
Step 1: Open a web browser, type in the address bar: 192.168.1.1
Step 2: Log in with username, password (admin in case of default).
Step 3: Click Network-> LAN and change the IP address in the IP Address bar.
Step 4: Click Save to save the settings.
Note: After changing the IP address, if you need to replace with a different IP or reconfigure your computer’s IP address, you can log into the router using the web browser.
The IP address 192.168.1.1 is not too unfamiliar with many people, especially those who regularly use the wifi network. I hope that the knowledge in this article can provide users with a better understanding of the default management address, the default gateway address is 192.168.1.1. This is quite common, and how to handle the basic error when your home network devices have a failure.
If you want to manage your network devices intelligently and perfectly, do not forget to log into the IP address 192.168.1.1. With the IP address 192.168.1.1, everything will be optimized and simplified with your network devices.